EC-4R |
EC-4 |
EC-4R
Frame System
The
EC-4R frame system is one of the narrowest frames (4
13-32") in the EC line and was designed for single
face cabinets. EC-4R system is designed for lightweight
interior applications. Unique to the EC-4 system is
its 1" radius retainer. This system will hold up
to 3/16" material in its built-in retainer system.
into the EC-4 frame to close the face in. When closed,
the removable retainer integrally locks itself into
the EC-4 frame showing no exterior fasteners. Corner
angles have also been raised off the bottom of the frame
to avoid any visible fasteners around the cabinet. Available
in mill finish.
|
EC-7R |
EC-7R
Frame System
The
EC-7R frame system is one of our narrower frames (6
13/16") in the EC line designed for single face
cabinets. EC-7R system was designed for lightweight
interior and exterior applications. Unique to the EC-7
system is its 1" radius retainer. This system will
hold up to 3/16" material in its built-in retainer
system. into the EC-7 frame to close the face in. When
closed, the removable retainer integrally locks itself
into the EC-7 frame showing no exterior fasteners. Corner
angles have also been raised off the bottom of the frame
to avoid any visible fasteners around the cabinet. Available
in both mill and pre-painted bronze finish.
|
EC-7 |
EC-8R |
EC-8R
Frame System
The
EC-8R frame system is 8" in depth and is designed
for double face cabinets. EC-8R system was designed
for lightweight interior and exterior applications.
Unique to the EC-8 system is its 1" radius retainer.
This system will hold up to 3/16" material in its
built-in retainer system. The removable retainer integrally
locks into the EC-8 frame to close the face in on both
sides. When closed, it will lock itself into the EC-8
frame showing no exterior fasteners. Corner angles have
also been raised off the bottom of the frame to avoid
any visible fasteners around the cabinet. Available
in mill finish.
|
EC-8 |
EC-8
Frame System
The
EC-8 Frame system is designed for double face applications.
Like the EC-4 & 7 frame systems they all use the
"snap" retainer system. This frame system
can be used for enter and exit signs or directory signs.
|
 |
|
EC-4,
7 and 8 Retainer
|
| Top
of Page |
