EC-S/F Hinged Frame

EC-D/F Hinged Frame

EC-Changeable Copy System

The EC-Changeable Copy System has been designed for single and double face applications on signs that need a two retainer system. The first retainer holds the interior face and changeable copy track while the other retainer system holds the clear locking vandal cover. The ease of both systems will save you long hours of fabrication and provide your clients a great looking sign. The EC-S/F system will be 9" deep, EC-D/F System will be 13" deep, and the EC-12 System will be 16" deep with the FF-2 retainer. Available in mill or pre-painted dark bronze. Locks are available upon request.

EC-Changeable Copy Divider Bar

This profile is used with our Changeable Copy System when the vandal cover needs to split. The divider bar allows you to split the vandal cover yet the retainer profiles remains even. Both faces can be hinged separately.

Vandal Cover Lock Assembly

To attach pin lock, measure 6" to 8" up from the bottom of the cabinet. Drill 7/8" Dia. hole for the cylinder through the FF-2 retainer. Attach latch for the pin lock to the H-1 or H-1.5 retainer. Drill a 3/8" hole for the pin, (as pictured), to match up with the pin.

For best results:
A flat head screw should be used to fasten the lock to the retainer so there is enough clearance for the latch. This should be done on both sides of the cabinet to secure the vandal cover. Drill 5/64" Dia. pilot hole for screws.